CatGenie - The World's Only Self-Flushing, Self Washing Cat Box
0844 736 2790
Spend just a few minutes to set up your CatGenie
then enjoy litter box freedom for the rest of your life.
CatGenie in a bathroom requires an easy, one time Do-It-Yourself connection to fresh, COLD water intake, a toilet and an electric outlet. See the Simple Set Up Guide for complete details.
1) Turn mains water off as a precaution.
Use supplied self-cutting tap to connect to the toilet or sink cold water line. (5 mins)

2)Screw the CatGenie water hose to the self-cutting tap. (2 minutes). Be careful not to over-tighten or get cross threaded.

3) Turn the mains water back on, turn on the self cutting tap & check for leaks. (2 minutes)
  4) Hook the CatGenie drainage hose over the
rim of the toilet and under the seat. You can
keep it there and still use the toilet. (1 minute) NB: For best performance and convenience it is best to plumb in permanently using a suitable waste outlet connection available from DIY stores.

5) Plug into an electric outlet. (30 secs)
You can pre program your CatGenie to run
automatically up to four times a day or simply
push a button to start. (Please consult a qualified electrician or call us for bathroom / toilet wiring advice)

Please Note: For more modern properties / flats etc a flexible cold water hose may be available that can be connected into with a T piece or screw fitting available from DIY stores. Please call us or consult a qualified plumber for further advice.
Calls to 0844 numbers are max 3.92p per min (Inc VAT) from a BT landline (May 09)